EP- Laboratory – Roof & Gutter De-icing Heating Cable

✓ Cut-thr Resistance Test

✓ Flammability Test Roof & Gutter Heating cables prevent ice dam formation on residential & commercial homes, and provide a clear path for melted water to drain. Protects your home from snow & ice damage.

EP- Laboratory – Snow Melting Cable/ Heated Driveway

✓ Cut-thr Resistance Test

✓ Compression Test

✓ Cold Bend Test

Are you shoveling the snow every winter? EPOLY’s SHC/SHM Snow melting heating cable/mat are ideal solutions to automatically prevent snow and ice build-up on the walkway/driveway in winter. It’ s eco-friendly and highly efficient compared with conventional snow removal methods that often cause damage. It has good flexibility, can be shaped and used in combinations of different sizes. Output is 12w/ft(50w/sqft). Its proficient performance allows the heated surfaces to be free of snow and ice. Available for both concrete and asphalt.

EP- Laboratory – It’s time for PFP Pipe Freeze Protection Heating Cable!

✓ Crush Resistance Test

✓ Wear Test

✓ Flammability Test

Pipe Freeze Protection by Constant Wattage Cable Are you ready for this coming winter?

EPOLY’s pipe heating cable with an integrated energy-saving thermostat will automatically heat up when the temperature drops below 40°F/4°C. To protect water pipes from freezing and bursting in winter, simply applied the cables straight along pipes and then cover the pipes with a layer of thermal insulation. The cables will make up for the heat lost through the thermal insulation and keep the pipes and water inside at a constant temperature

EPOLY understands how tiring it is to shovel the snow every winter, underfloor snow melting mat is another option to keep walkways/driveway and outdoor surfaces free of snow and ice.

SHC/SHM cable consists of a series heating cable(twin-cores). It is designed for outdoor use to melt the ice or snow on the exterior surface by embedding in concrete, pavers, asphalt, or sand. Avoid slip-and-fall injuries. It is available in 120V and 240V with various lengths.

The snow and ice melt without an effort, enjoy the no more shoveling in winter.

EPOLY’s pipe heating cable with an integrated energy-saving thermostat will automatically heat up when the temperature drops below 40°F/4°C. To protect water pipes from freezing and bursting in winter, simply applied the cables straight along pipes and then cover the pipes with a layer of thermal insulation. The cables will make up for the heat lost through the thermal insulation and keep the pipes and water inside at a constant temperature

Prefabricated Floor Heating Module is a customized floor heating solution, which integrates the heat trace cables into the insulation board. It can be designed perfectly to match your house design. Both mesh and aluminum foil heating modules have twin-core heating wires, which are safe and free of electromagnetic radiation.

• Simple – A minute installation •Quality – 50-year life expectancy.
• Ship – Foldable for easy transportation.
• Safe – Approved by CE/UL certification.
• Tailor-made – Match the house design perfectly.
• Convenient – No more extra work and human error.
• Thin – FEP toughest and thinnest wire, increase floor level by only 3mm.
• Prefabricated solution – Saves the labor and time costs by almost no installation work.

Are your pipes ready for the coming winter?

It’s necessary to take precautions to prevent restricted flow and the dreaded pipe burst. EPOLY’ s pipe freeze protection by constant wattage heating cable keeps the pipes and water inside at a constant temperature to reduce the risk of burst or frozen pipes.

To keep water flowing all winter long, it starts heating up when the temperature drops below 4°C/39.2°F, and stops heating when above 14°C/57.2°F automatically.

Why Choose EPOLY EMJB?

• For easy connecting, the placement of connections of different cables are not only staggered but also located in vertically different levels.
• Each connection is separated from others by insulation walls to further enhance safety.
• EMJB can also serve as a power junction box by simply replacing one of the grommets.
• The graduation is printed on the box for quick measuring while stripping.
• The lid is hinged at the box and its bolts and nuts are embedded in the box, so no worry for dropping them especially at aloft work.
• The box can be installed using Standoff or hose clamps.

Why Choose EPOLY’s EPJB Power Junction Box?

1. Feed-through Terminal Block makes the connection easy and reliable.
2. Power entries on both sides.
3. Drop-proof design: No worry for dropping the lid and screws especially at aloft work.

EPJB is a handy power junction box for SR heating cable with the following features:

• Feed-through terminal block with spring clamp makes the connection easy and reliable.
• The quantity of terminals can be adjusted according to the number of cables to make sure each wire has a dedicated connecting block.
• The power cable can be installed through any of the three openings of the box.
• EPJB can also serve as a splice junction box with three openings available for splicing heating cables.
• The box can be installed using T-Standoff or be wall mounted by the two external mounting holes.
• The lid is hinged at the box and its bolts and nuts are embedded in the box, so no worry for dropping them especially at aloft work.

EMJB is a SR connection box for 2-way splice or T-splice with the following superior design:

• For easy connecting, the placement of connections of different cables are not only staggered but also located in vertically different levels.
• Each connection is separated from others by insulation walls to further enhance safety.
• EMJB can also serve as a power junction box by simply replacing one of the grommets.
• The graduation is printed on the box for quick measuring while stripping.
• The lid is hinged at the box and its bolts and nuts are embedded in the box, so no worry for dropping them especially at aloft work.
• The box can be installed using Standoff or hose clamps.

AIES-L is the end seal indicator light system. The light indicates the operation status of the heating cable, and also the position of the end seal. It helps the in-process inspection and the post maintenance to operate efficiently.

EPJB is a handy power junction box for SR heating cable with the following features:

• Feed-through terminal block with spring clamp makes the connection easy and reliable.
• The quantity of terminals can be adjusted according to the number of cables to make sure each wire has a dedicated connecting block.
• The power cable can be installed through any of the three openings of the box.
• EPJB can also serve as a splice junction box with three openings available for splicing heating cables.
• The box can be installed using T-Standoff or be wall mounted by the two external mounting holes. • The lid is hinged at the box and its bolts and nuts are embedded in the box, so no worry for dropping them especially at aloft work.

EMJB is a SR connection box for 2-way splice or T-splice with the following superior design:

• For easy connecting, the placement of connections of different cables are not only staggered but also located in vertically different levels.
• Each connection is separated from others by insulation walls to further enhance safety.
• EMJB can also serve as a power junction box by simply replacing one of the grommets.
• The graduation is printed on the box for quick measuring while stripping.
• The lid is hinged at the box and its bolts and nuts are embedded in the box, so no worry for dropping them especially at aloft work.
• The box can be installed using Standoff or hose clamps.

AIES-L is the end seal indicator light system. The light indicates the operation status of the heating cable, and also the position of the end seal. It helps the in-process inspection and the post maintenance to operate efficiently.

The resistance of a 1 meter heating cable(1mm2) is 0.0082Ω/M(twin cores), the 14AWG power cable is 0.0042Ω/M. According to 1 meter of heating cable(1mm2) and 14AWG power cable, the electrical resistance is 0.0124Ω. The resistance of SRQ copper components and the contact resistance about 0.0125Ω.

The SRQ makes the connection completely once the total resistance is under 0.025Ω. (Total Resistance: 1 meter of heating cable(1mm2) + 1 meter of 14AWG power cable + SRQ copper components + contact resistance) Contact resistance is the resistance to current flow, when the conductors are touching one another (in the closed condition of the device).

It is also a security standard of a connector, to evaluate the loss or attenuation of current from power transmission. The lower the contact resistance, the better the connection.Too much contact resistance generates a lot of heat when power is up, which might cause a fire. Normally, the contact resistance of a connector should be under 10-20mohm(0.01ohm-0.02ohm).

SRQ makes the installation of Self-regulating/ limiting heating cable/tape be simple.

EPOLY’s SRQ saves the self regulating heating cable/tape cost by simplifying the installation

The installation of self-regulating heating cable always takes time and needs multiple tools to complete. To simplify the work, the quick connection solution comes out. SRQ is a simpler and safer connector, which saves the labor and time cost by the faster installation. It is specially designed for work with the heating tapes, which is 11~14mm, and the distance of the conductor is 7~12mm. The connection can be as simple as only using a knife and a diagonal plier, removing a part of the outer jacket, treating the braiding, and twisting our SRQ connector, no more time-consuming works.

SRQ offers advantages such as:

1. Environmentally friendly – Reusable
2. Aesthetic – No more heat shrink tube
3. Simple – Easy to install and disassemble
4. Safe – Simpler works preventing human

SRQ makes the installation of self regulating heating cable/tape be safe and quick. errorEconomical – Save the Installation cost

EPOLY sent our SRQ to EP- Laboratory.

1. Tensile Test
2. Compression Test
3. Temperature Rise Test

The installation of self-regulating heating cable always takes time and needs multiple tools to complete. To simplify the work, the quick connection solution comes out. SRQ is a simpler and safer connector, which saves the labor and time cost by the faster installation. It is specially designed for work with the heating tapes, which is 11~14mm, and the distance of the conductor is 7~12mm. The connection can be as simple as only using a knife and a diagonal plier, removing a part of the outer jacket, treating the braiding, and twisting our SRQ connector, no more time-consuming works.

EP- Laboratory – Snow Melting Cable/ Heated Driveway

✓ Cut-thr Resistance Test

✓ Compression Test

✓ Cold Bend Test

Are you shoveling the snow every winter?

EPOLY’s SHC/SHM Snow melting heating cable/mat are ideal solutions to automatically prevent snow and ice build-up on the walkway/driveway in winter. It’ s eco-friendly and highly efficient compared with conventional snow removal methods that often cause damage. It has good flexibility, can be shaped and used in combinations of different sizes. Output is 12w/ft(50w/sqft). Its proficient performance allows the heated surfaces to be free of snow and ice. Available for both concrete and asphalt.

EPOLY’s tailor-made floor heating module is sent to EP-Laboratory today!

• Floor Heating Cable ✓ Tensile Test ✓ Aging Test ✓ 1.5 kV Water Proof Test
• Insulation Board ✓ Compression Test

EP-HM is a customized surface heating solution, which integrates the heat trace cables into the insulation materials. It can be designed perfectly to match your applications. The module can be used in a wide variety of applications like floor heating, wall heating, industrial heating, and any other surfaces in need of heat, regardless of the size, the environment, and so on.

EP-HM offers advantages such as: Safety ensured – EP-HM is 100% completed by professional technicians. Cost-saving- EP-HM saves the labor and time costs by almost no installation work. Easy to ship (convenient transportation)- EP-HM is the foldable module, which is easy for storage and shipment. Custom – EP-HM is 100% customized which can be designed based on the working environment.

As a leading heat tracing manufacturer, we assured you that all the products will follow the safety and security certification by third party, and are subjected to intense performance and endurance testing through our IEEE515 EP-L labs.