LOGO2Epoly LOGO1

Roof & Gutter De-icing

Peace of mind for the roof and home in winter.

Roof and Gutter De-icing by Self-regulating Heating Cable

RGS series are used on roofs to provide a continuous drain path for melted ice and snow to flow through the gutter and to the downspout. The self-regulating characteristic adjusts cable's heat output in accordance with the ambient condition. In snow and icy water, the heating cable operates at full power. As the snow melts and the water drains away, RGS self-regulates to half power. As it gets warmer, the power output will decrease to reduce energy consumption.

  • Features

    • Temperature self-regulating, never over-heating, safe to overlap     
    • Can be cut to lengths and terminated in the field
    • Applicable for all types of roofs and gutters
    • Designed to be subject to water and sunlight
    • No temperature controller is required
    • Energy conservative

    RGS construction

    Cable Construction

    Bus Wire: Tinned copper
    Heating Core: Semi-conductive Self-limiting Matrix
    Insulation: Radiation Crossed-linked Polyolefin
    Braiding: Tinned copper
    Outer Jacket: Thermoplastic or Fluoropolymer

    		  Pre-assembled RGS
    Can be pre-assembled with power cord and plug for easy installation
    (Model Number: ESR)

    Performance

    Apply Voltage:110V~120V and 220V~277V
    Power Output: In ice or snow at 0°C 40W/m, In air at 10°C 26W/m
    Max. Maintenance Temperature: 65℃
    Max. Exposure Temperature: 85℃
    Min. Installation Temperature: -18℃
    Min. Bending Radius(-18℃): 15mm

    RGS ESR installation

    Ordering Information
    Model NumberVoltageOuter Jacket
         
    RGS026ME1-0000-CR 110V~120V Thermoplastic
    RGS026ME1-0000-CT 110V~120V Fluoropolymer
    RGS026ME2-0000-CR 220V~277V Thermoplastic
    RGS026ME2-0000-CT 220V~277V Fluoropolymer

  • Features

    • Temperature self-regulating, never over-heating, safe to overlap     
    • Can be cut to lengths and terminated in the field
    • Applicable for all types of roofs and gutters
    • Designed to be subject to water and sunlight
    • No temperature controller is required
    • Energy conservative
      • cCSAus logoview certificate

    RGS construction

    Cable Construction

    Bus Wire: Tinned copper
    Heating Core: Semi-conductive Self-limiting Matrix
    Insulation: Radiation Crossed-linked Polyolefin
    Braiding: Tinned copper
    Outer Jacket: Elastomer with UV inhibitor

    		  Pre-assembled RGS
    Can be pre-assembled with power cord and plug for easy installation
    (Model Number: ESR)

    Performance

    Apply Voltage:110V~120V and 220V~277V
    Power Output: In ice or snow at 0°C 12W/ft, In air at 10°C 7.8W/ft
    Max. Maintenance Temperature: 65℃
    Max. Exposure Temperature: 85℃
    Min. Installation Temperature: -18℃
    Min. Bending Radius(-18℃): 0.6inch

    RGS ESR installation

    Ordering Information
    Model NumberVoltageMax. Circuit Length
         
    RGS008FT1 110V~120V 190ft
    RGS008FT2 220V~277V 394ft

Accessories

Self-regulating roof and gutter de-icing cable installation kit

Roof deicing cable automatic control receptacle

Self-regulating roof and gutter de-icing cable (RGS) connectionn kits