Pipe Freeze Protection

Effective and energy conservative solutions.

Pipe Freeze Protection by Self-regulating Cable

FLN series are designed to provide freeze protection of general water piping, sprinkler system standpipes, and temperature maintenance of greasy waste lines or fuel lines. Applicable to both metallic and nonmetallic pipes.

  • Features

    • Temperature self-regulating, never over-heating, safe to overlap and insulate
    • Can be cut to lengths and terminated in the field
    • Applicable for both metallic and non-metallic pipes
    • Protection against chemical and mechanical damage with Flouropolymer outer jacket
    • No temperature controller is required
    • Energy conservative

    ETR construction

    Cable Construction

    Bus Wire: Tinned copper
    Heating Core: Semi-conductive Self-limiting Matrix
    Insulation: Radiation Crossed-linked Polyolefin
    Braiding: Tinned copper
    Outer Jacket: Thermoplastic or Fluoropolymer

     

    Performance

    Apply Voltage: 110V~120V and 220V~240V
    Power Output(10℃): 10W/m(FLN010), 16W/m(FLN016), 26W/m(FLN026), 32W/m(FLN032)
    Max. Maintenance Temperature: 65℃
    Max. Exposure Temperature: 85℃
    Min. Installation Temperature: -18℃
    Min. Bending Radius(-18℃): 15mm

     

    Ordering Information

    • Model NumberPowerOuter Jacket
           
      FLN010ME1-0000-CR 10W/m Thermoplastic
      FLN010ME1-0000-CT 10W/m Fluoropolymer
      FLN016ME1-0000-CR 16W/m Thermoplastic
      FLN016ME1-0000-CT 16W/m Fluoropolymer
      FLN026ME1-0000-CR 26W/m Thermoplastic
      FLN026ME1-0000-CT 26W/m Fluoropolymer
      FLN032ME1-0000-CR 32W/m Thermoplastic
      FLN032ME1-0000-CT 32W/m Fluoropolymer
    • Model NumberPowerOuter Jacket
           
      FLN010ME3-0000-CR 10W/m Thermoplastic
      FLN010ME3-0000-CT 10W/m Fluoropolymer
      FLN016ME3-0000-CR 16W/m Thermoplastic
      FLN016ME3-0000-CT 16W/m Fluoropolymer
      FLN026ME3-0000-CR 26W/m Thermoplastic
      FLN026ME3-0000-CT 26W/m Fluoropolymer
      FLN032ME3-0000-CR 32W/m Thermoplastic
      FLN032ME3-0000-CT 32W/m Fluoropolymer

  • Features

    • Temperature self-regulating, never over-heating, safe to overlap and insulate
    • Can be cut to lengths and terminated in the field
    • Applicable for both metallic and non-metallic pipes
    • No temperature controller is required
    • Energy conservative

    FLN construction

    Cable Construction

    Bus Wire: Tinned copper
    Heating Core: Semi-conductive Self-limiting Matrix
    Insulation: Radiation Crossed-linked Polyolefin
    Braiding: Tinned copper
    Outer Jacket: Thermoplastic or Fluoropolymer

     

    Performance

    Apply Voltage: 110V~120V and 220V~240V
    Power Output(10℃): 3W/ft(FLN003), 5W/ft(FLN005), 8W/ft(FLN008), 10W/ft(FLN010)
    Max. Maintenance Temperature: 65℃
    Max. Exposure Temperature: 85℃
    Min. Installation Temperature: -18℃
    Min. Bending Radius(-18℃): 0.6inch

     

    Ordering Information

    • Model NumberPowerMax. Circuit Length
           
      FLN003FT1 3W/ft 299ft
      FLN005FT1 5W/ft 249ft
      FLN008FT1 8W/ft 190ft
    • Model NumberPowerMax. Circuit Length
           
      FLN003FT4 3W/ft 584ft
      FLN005FT4 5W/ft 489ft
      FLN008FT4 8W/ft 377ft
      FLN010FT4 10W/ft 325ft